Iscar Adds Their Latest Creations To A Long Line Of Outstanding Hole Generating Solutions
Iscar recently released a number of different drilling innovations to meet their customers needs. These most recent products are Sumocham Drill, DR-DH and Deep Drills. Drawing off of their skill Iscar has come up with fresh and innovative ways to boost productivity for the end user. Here is a little bit about these brand new products, and how they will serve the end user of these products.
SUMOCHAM Drills
ISCAR's new SUMOCHAM drill family is an advanced evolution of the exceptionally outstanding CHAMDRILL and CHAMDRILLJET drill families. The drill features twisted coolant nozzles with indexable drilling heads which are available in different head configurations for a range of material groups. SUMOCHAM drills can be used on milling centers or lathes.
SUMOCHAM includes four different standard drill head geometries, designed for unmatched performance and high reliability. The drill head is built with a sharp cutting edge and polished flutes. SUMOCHAM drilling heads are offered in the diameter range of 8 to 25.9 mm. The drill head has ground flutes for smooth, constant chip flow and a ground gash for improved penetration.
The drill shank design is in accordance to DIN 9766 standard, with obtainable drilling depth to diameter ratios of 1.5XD, 3xD, 5XD and 8xD. All drill bodies showcase coolant through holes. The accurate cylinder added to the clamping portion increases durability and reduces internal stresses. The rotation stopper planes are accurately ground, to enhance the control on the drilling head position and support, increasing tool performance and life. ISCAR's innovative SUMOCHAM drill line will furnish longer tool life and increased productivity.
DR-DH Deep Drills
DR-DH drills can acquire drilling depth-to-diameter ratio of 7XD and up. Engineered to be employed on standard horizontal milling centers, turning, and multi-task machines. Use of additional machine and setup can be avoided. They will be available as semi-standard item in a diameter range of 25.4 to 69.5 mm (1.00 - 2.73").
Two versions will be available:
A Single Flute DR-DH-31.65-0350NC-2FS is a very stiff tool complete with a patented chip gullet design. It was built for easily cut materials such as cast iron and low alloyed steel.
A Double Flute DR-DH-31.65-0350NC-2FD has a double chip gullet for better chip flow. It was engineered for drilling gummy materials like non-alloyed steel and high temperature alloys.
ISCAR DEEP HOLE DRILLS
With ISCAR's brand new solid carbide deep hole drills, you can safely drill up to 22 times diameter and arrive bottom10% faster than with other solid carbide drills - and six times faster than a HSS drill. This capacity can speed up a great number of high-volume operations. The deep-hole drilling station no longer needs to slow down a transfer line or stop it entirely because a drill broke.
Different target applications encompass deep holes for automotive, hydraulic blocks and die & mold work. A aggregate of features help the twist drills to cut faster, straighter,deeper, last longer and discharge chips more readily. A specialized high-strength core creates a more durable drill point and allows for deeper flutes, enlarging the departure path for chips.
The drill tip themselves have a 140 positive-point, four-margin design to maintain the edge, diminish thrust forces and assist centering and tracking. A post-coat polishing measure on the flutes, margins and cutting edges decreases friction and torque that can quickly snap a drill.
The new drills are found in normal diameters ranging from 5 to 10 mm, in 20 and 22 length to diameter ratios. Special sizes are offered on request. All are manufactured of IC908, a 10% cobalt submicron carbide grade, and comes with a TiAlN PVD coating, and can be refurbished.
These are just some of the latest innovations coming from Iscar.
The Latest In Carbide Endmill Designs In A Lengthy And Successful Family From Iscar
Manufacturers and die & mold shops can eliminate chatter problems in many milling operations with Iscar's new Chatterfree endmills. The cutters' variable-pitch flute pattern eliminates harmonic vibration, the main source of chatter. This enables faster cutting and finer finish in rough or finish slotting, shoulder milling and cavity milling.
Cutting Edge Cutters And Carbide Insert Shapes From Iscar To Better Maximize The Machining Process
Iscar is introducing Penta 34 carbide inserts with a new PB chipformer. The PB chipformer features a single cavity with a positive rake, neutral shoulder angle, and a honed edge. It is actually a C-type chipformer with a different frontal edge.
Iscar Announces A Revolutionary Family Of Slitting Cutters Utilizing Tang-Grip Technology And The Durability Of Sumo Tec Grades
Iscar now offers a family of high-performance slitting tools that combine the convenience and security of Tang-Grip clamping with the added durability of the new Sumo Tec insert grades. The concept, already proven successful in Tang-Grip parting tools, has now been extended to slitting cutters.
A Few Of The Numerous Improvements In Carbide Inserts By Iscar
Iscar is introducing a new unique milling system with tangential, clamped, butterfly-shaped LNKX carbide inserts. The butterfly-shaped insert has significant advantages compared to the current flat, square shapes. The new geometry has more cutting edges, positive rake face, reduced cutting forces resulting in higher performance.
A Handful Of Upgrades In Carbide Inserts Due To Iscar Over The Former Decade
Iscar is announcing a brand new unique milling system that includes tangential, clamped, butterfly-shaped LNKX carbide inserts. The butterfly-shaped insert has meaningful advantages compared to the current flat, square shapes. The new geometry has more cutting edges, positive rake face, decreased cutting forces resulting in better performance.
Push Pull Testing For Railway Industry With Calibrated Gauges. Mechanical Load Testing Methods For On Site Evidence To Testing Requirements.
Push Pull Testing for the Railway industry for proof of reliable anchor fixings. Calibrated push pull force gauges are used for stress load testing along with tensile strength pull testing procedures. Proof of load testing undertaken, measured, recorded in a reliable and standard way to BS5080 Part 1 standards.
Automotive Manufacturing Jobs - What To Watch Out For And Why.
There is no point in denying that workers serving in the automotive industry are also suffering from the economic recession that everybody is experiencing world wide.