Cutting Edge Cutters And Carbide Insert Shapes From Iscar To Better Maximize The Machining Process
Iscar is releasing Penta 34 carbide inserts with a innovative PB chipformer. The PB chipformer incorporates a single cavity by having a positive rake, neutral shoulder angle, and a honed edge. It is actually a C-type chipformer with a different frontal edge.
The new chipformer was intended for machining soft materials. It is an wonderful solution for parting bearing steel and other highly ductile materials. It can be used at low feed: 0.03 to 0.10 mm/rev.
The combination of the new chipformer and IC908 grade provides exceptional chip breaking and tool life results. The Penta 34-PB is available in a 1.5 to 3.0 mm width range, made from the ingenuous IC908 PVD coated grade. The completely new family extends the application range of Iscar's most economical grooving and parting PENTA 34 carbide inserts. The Penta 34-PB, when examined to a competitor's cutter, is a leading solution for machining any soft and ductile material.
Iscar's Upgrades for Parting
Iscar has developed a revolutionary family of reinforced Tang-Grip blades for the prominent TRAUB (TNL and TNK models) and INDEX (MS18C model) turn/mill machines. These blades, due to their reinforced composition, can be used in long overhang. Only the part of the blade required for penetration (cutting depth) has a reduced width. The rest is thick, which provides upgraded rigidity and stiffness. These blades are an outstanding solution for parting and grooving in between the main and sub-spindle of turn/mill machines. The single-ended insert has a very rigid clamping and therefore provides a exceptionally valuable advantage over any other system.
Further additions to Iscar's Grip family are Do-Grip carbide inserts fashioned from the new Sumo Tec carbide grades: IC807 IC808 and IC830. The new Sumo Tec grades significantly increase insert life, due to the utmost advanced coating technology followed by a particular surface treatment. This also provides improved tool life due to lowered surface stress and an uniformly coated top surface. The level surface contributes to smooth uninterrupted chip flow, less generated heat and less friction. The new process improves toughness and chipping resistance and thus lessens friction and built-up edge. This in turn optimizes and prolongs tool life at expanded machining conditions for all types of work piece materials. The new PVD process is composed of Iscar's AL-TEC coating technology, employing the unique surface treatment.
Iscar's Chip Splitting Inserts
Iscar's completely new HM90 APCR 220605-CS grooved carbide inserts put an end to chip clogging problems in rough milling of aluminum, where chips can pile up. They are a part of Iscar's growing Helialu HM90 line of inserts tailored specifically for aluminum milling. With 2 grooves pressed into every single polished cutting face, the inserts split aluminum chips into a amendable size for easy, reliable evacuation despite the application's characteristic immense chip volume. The 22 mm inserts, each with 2 edges, are designed to amplify metal removal over the full range of aluminum roughing conditions, from high power/low speed to high power/high speed. They work especially well with Iscar's new HM90 EAL/FAL...22 aluminum rough milling cutters. Besides dependably clearing chips, the inserts conserve power and trim down chatter in long-overhang setups. The inserts feature a cavity on the bottom to make sure correct mounting in cutter chip pockets equipped with conventional spring pins. For best chip control, Iscar advocates using the HM90 APCR chip-splitting insert only in cutters with an even number of flutes.
Iscar Recently Releases Numerous Revolutionary Lines To Enlarge Their Family Of Milling Cutters
Iscar recently released a new family of High Speed Milling adjustable endmills and facemills that will improve milling of aluminum, non-metallics, cast iron and hardened steel. This should prove especially useful in the automotive and aerospace industries.
Iscar Adds Their Latest Creations To A Long Line Of Outstanding Hole Generating Solutions
Iscar recently released several different drilling innovations to meet their customers needs. These new products are Sumocham Drill, DR-DH and Deep Drills. Drawing off of their experience Iscar has come up with new and innovative ways to increase productivity for the end user.
Iscar Announces A Revolutionary Family Of Slitting Cutters Utilizing Tang-Grip Technology And The Durability Of Sumo Tec Grades
Iscar now offers a family of high-performance slitting tools that combine the convenience and security of Tang-Grip clamping with the added durability of the new Sumo Tec insert grades. The concept, already proven successful in Tang-Grip parting tools, has now been extended to slitting cutters.
A Few Of The Numerous Improvements In Carbide Inserts By Iscar
Iscar is introducing a new unique milling system with tangential, clamped, butterfly-shaped LNKX carbide inserts. The butterfly-shaped insert has significant advantages compared to the current flat, square shapes. The new geometry has more cutting edges, positive rake face, reduced cutting forces resulting in higher performance.
A Handful Of Upgrades In Carbide Inserts Due To Iscar Over The Former Decade
Iscar is announcing a brand new unique milling system that includes tangential, clamped, butterfly-shaped LNKX carbide inserts. The butterfly-shaped insert has meaningful advantages compared to the current flat, square shapes. The new geometry has more cutting edges, positive rake face, decreased cutting forces resulting in better performance.
Push Pull Testing For Railway Industry With Calibrated Gauges. Mechanical Load Testing Methods For On Site Evidence To Testing Requirements.
Push Pull Testing for the Railway industry for proof of reliable anchor fixings. Calibrated push pull force gauges are used for stress load testing along with tensile strength pull testing procedures. Proof of load testing undertaken, measured, recorded in a reliable and standard way to BS5080 Part 1 standards.
Automotive Manufacturing Jobs - What To Watch Out For And Why.
There is no point in denying that workers serving in the automotive industry are also suffering from the economic recession that everybody is experiencing world wide.